Fast processing and continuous simulation of automotive structural composite components |
Henning, F.; Kärger, L.; Dörr, D.; Schirmaier, F.J.; Seuffert, J.; Bernath, A. |
Composites Science and Technology 171: 261-279 |
*TAGUNG* |
|
|
Advanced Macroscopic Modelling Approaches for FE Composite Forming Simulation Using Abaqus |
Dörr, D.; Poppe, C.; Zimmerling, C.; Krauß, C.; Schäfer, B.; Henning, F.; Kärger, L |
Hanau |
Integrated process simulation as enabler for efficient and robust design of composites and hybrids |
Dörr, D., Fengler, B., Hohberg, M., Kärger, L., Henning, F |
Seoul (Korea) |
A Multi-Scale Approach for the Virtual Characterization of Transversely Isotropic Viscoelastic Materials in the Frequency Domain |
Jackstadt, A.; Liebig, W.; Sessner, V.; Weidenmann, K. A.; Kärger, L. |
Freiburg |
A revisit of Jeffery‘s equation – modelling fiber suspensions with Smoothed Particle Hydrodynamics |
Meyer N., Saburow, O., Hohberg, M., Hrymak, A., Henning, F., Kärger, L |
Darmstadt |
Thermomechanical analysis of thermoforming processes with continuously fibre-reinforced semi-crystalline thermoplastics |
Dörr, D., Joppich, T., Kugele, D., Henning, F., Kärger, L |
Darmstadt |
Simulation of Discontinuous Fiber Reinforced Polymers along the CAE-Chain |
Hohberg, M.; Fengler, B.; Saburow, O.; Meyer, N.; Wittemann, F.; Dörr, D.; Kärger, L.; Henning, F |
Darmstadt |
An approach for the layer-by-layer analysis of fiber orientation of continuously fiber-reinforced polymers based on orientation analyses of computer-tomographic (CT) scans |
Schöttl, L.; Dörr, D.; Pinter, P.; Joppich, T.; Henning, F.; Kärger, L |
Darmstadt |
Generation of Reliable Input Data for a Damage Model Taking Use of a Closed CAE-Chain Containing Material Interfaces |
Krauß, C.; Galkin, S.; Kärger, L. |
New York City |
Failure and Damage Analysis of Undulated Fiber Composites depending on the Fiber Volume Content |
Kärger, L.; Galkin, S. |
Keynote Lecture. Eingeladener Vortrag |
Continuous Process Simulation for Continuous Fiber Reinforced Composites |
Kärger, L.; Dörr, D.; Poppe, C.; Seuffert, J.; Bernath, A.; Galkin, S.; Zimmerling, C.; Henning, F. |
Amsterdam |
Systemleichtbau mit thermoplastischen Hochleistungsfaserverbunden in Hybridbauweise – neue Konzepte für die Fahrzeugkarosserie |
T. Link, S. Baumgärtner, D. Dörr, M. Hohberg, F. Henning |
Augsburg |
Simulation of Discontinuous Fiber Reinforced Composites along the CAE-Chain |
F. Wittemann, M. Hohberg, B. Fengler, O. Saburow, N. Meyer, D. Dörr, L. Kärger, F. Henning |
Stuttgart |
Durchgehende CAE-Kette durch die Verknüpfung des Design, der Prozess- und der Struktursimulation zur ganzheitlichen Bewertung von langfaserverstärkten Duromeren und Thermoplasten |
Hohberg, M.; Fengler, B.; Saburow, O.; Meyer, N.; Wittemann, F.; Dörr, D.; Kärger, L.; Henning, F. |
Pfinztal |
Developments and analyses of alternative processes for the manufacturing of fibre metal laminates |
Mennecart, T.; Werner, H.; Khalifa, N.; Weidenmann, K.A. |
Proceedings |
Mold filling simulation of a pressure-controlled resin transfer molding (PC-RTM) process – method and application |
Seuffert, J.; Rosenberg, P.; Kärger, L.; Henning, F., Kothmann, M.; Deinzer, G. |
Conference Proceedings |
Process simulation of Sheet Moulding Compound (SMC) using an extensional viscosity model |
Hohberg, M.; Kärger, L.; Hrymak, A.; Henning, F. |
Conference Proceedings |
Enhanced viscosity characterization for fast curing epoxy resins at process relevant temperatures |
Bernath, A.; Grulich, M.; Kärger, L.; Henning, F. |
Conference Proceedings |
Application and Evaluation of Meta-Model Assisted Optimisation Strategies for Gripper-Assisted Fabric Draping in Composite Manufacturing |
Zimmerling, C.; Pfrommer, J.; Liu, J.; Beyerer, J.; Henning, F.; Kärger, L. |
Conference Proceedings |
A 2D modeling approach for fluid propagation during FE-forming simulation of continuously reinforced composites in wet compression moulding |
Poppe, C.; Dörr, D.; Henning, F.; Kärger, L. |
AIP Conference Proceedings 1960, 020022 |
Modelling Approach for Anisotropic Inter-Ply Slippage in Finite Element Forming Simulation of Thermoplastic UD-Tapes |
Dörr, D.; Faisst, M.; Joppich, T.; Poppe, C.; Henning, F.; Kärger, L. |
AIP Conference Proceedings 1960, 020005 |
A Meta-Model Based Approach for Rapid Formability Estimation of Continuous Fibre Reinforced Components |
Zimmerling, C.; Dörr, D.; Henning, F.; Kärger, L. |
Proceedings 1960, 020042 |
Optimisation of manufacturing process parameters using deep neural networks as surrogate models |
Pfrommer, J.; Zimmerling, C.; Liu, J.; Kärger, L.; Henning, F.; Beyerer, J. |
Procedia CIRP 72:426-431 |
Strength of UD-laminates depending on the fiber volume content: experimental tests and modelling |
Galkin, S.; Kärger, L. |
Athen |
Integrierte Prozesssimulation - Beschleunigung von Produktentwicklung durch robuste und ganzheitliche virtuelle Auslegung |
Dörr, D.; Fengler, B.; Hohberg, M.; Kärger, L.; Henning, F.; Baumgärtner, S.; Link, T.; Joppich, T.; Rausch, J.; Ebli, S.; Graf, M.; Wetterau, H.J. |
Carbon Composites Magazine 2/2018: 42-43 |
Experimental and numerical investigation of the shear behaviour of infiltrated woven fabrics |
Poppe, C.; Dörr, D.; Henning, F.; Kärger, L. |
Composite Part A, Vol 14, 327-337 |
Numerical and experimental investigations of the damping behaviour of hybrid CFRP-elastomer-metal laminates |
Liebig, W.; Sessner, V.; Weidenmann, K.A.; Kärger, L. |
Available online at Composite Structures |
Nonlinear hyperviscoelastic modelling of intra-ply deformation behaviour in finite element forming simulation of continuously fibre-reinforced thermoplastics |
Dörr, D.; Henning, F.; Kärger, L. |
Composites: Part A 109:585-596 |
Experimental and numerical study of the influence of integrated load transmission elements on filling behavior in resin transfer molding |
Magagnato, D.; Seuffert, J.; Bernath, A.; Kärger, L.; Henning, F. |
Composite Structures (2018), accepted manuscript, available online, ISSN 0263-8223 |
Numerical and experimental investigation of manufacturing and performaance of metal inserts embedded in CFRP |
Muth, M.; Schwennen, J.; Bernath, A.; Seuffert, J.; Weidenmann, K. A.; Fleischer, J.; Henning, F. |
Production Engineering 24 (2018) 12, S. 1246 |
Simulating Mold Filling in Compression Resin Transfer Molding (CRTM) Using a Three-Dimensional Finite-Volume Formulation |
Seuffert, J., Kärger, L., Henning, F. |
Journal of Composites Science, 2(2), 23 |
Multi-Objective Patch Optimization with Integrated Kinematic Draping Simulation for Continuous–Discontinuous Fiber-Reinforced Composite Structures |
Fengler, B.; Kärger, L.; Hrymak, A.; Henning, F. |
Composite Science 2018, 2(2), 22 |
Simulation of Discontinuous Fiber Reinforced Composites along the CAE-Chain |
Wittemann F., Hohberg M., Fengler B., Saburow O., Meyer N., Dörr D., Kärger L., Henning F. |
Stuttgart |
Vorstellung DEmiL – Direktgekühlter Elektromotor mit integralem Leichtbaugehäuse |
Wittemann, F. |
Stuttgart |
Integration of a kinematic draping simulation in a multi objective structural tape optimization |
Fengler B., Kärger L., Hrymak A., Henning F. |
Composite Science 2018, 2(2), 22 |
Forming optimisation em-bedded in a CAE chain to assess and enhance the structural performance of composite components |
Kärger L., Galkin S., Zimmerling C., Dörr D., Linden J., Oeckerath A., Wolf K. |
Composite Structures 192: 143-152 |
Simulation of Reinforced Reactive Injection Molding with the Finite Volume Method |
Wittemann F., Maertens R., Bernath A., Hohberg M., Kärger L., Henning F |
Journal of Composites Science 2(1), 5, 2018 |
An iterative approach for the determination of tailored blanks for waste-free composite forming by means of FE forming simulation |
Dörr, D.; Lipowsky, L.; Schirmaier, F.; Kärger, L.; Henning, F. |
Int. J. Automotive Composites 3(2-4): 323-338 |
Investigation of the damping behaviour of hy-brid CFRP-elastomer-metal laminates |
Liebig W., Sessner V., Weidenmann K., Kärger L. |
Paris |
Comparison of the Flow and Rheological Behavior of Two Semi-Structural Sheet-Molding-Compound (SMC) Based on a Hybrid Resin and Glass or Carbon Fibers |
Hohberg, M.; Kärger, L.; Henning, F.; Hrymak, A. |
Cancun, Mexico |
Expanding Applications Areas for Sheet Molding Compound (SMC) Through New Material Compositions and New Hybrid Processes |
Hrymak, A.; Bücheler, D.; Henning, F.; Ugresic, V.; Hohberg, M. |
Cancun, Mexico |
Investigations on friction behavior and forming simulation of plain woven fabrics for wet compression molding |
Hüttl J., Albrecht F., Poppe C., Lorzenz F., Thoma B., Kärger L., Middendorf P., Henning F. |
Stuttgart |
Processing of continuous-discontinuous fiber reinforced thermosets |
Bücheler D., Trauth A., Damm A., Böhlke T., Henning F., Kärger L., Seelig T., Weidenmann K.A. |
Stuttgart |
Modeling three-dimensional anisotropic dam-age in organic sheet composites at large deformation |
Naake D., Welschinger F., Kärger L., Henning F. |
Stuttgart |
Influence of the tape number on the optimized structural performance of locally reinforced composite structures |
Fengler B., Kärger L., Hrymak A. |
Stuttgart |
Zeit- und kosteneffiziente Prozess- und Produktentwicklung für den Hochleistungs-Faserverbundleichtbau mittels Nasspresstechnologie |
Poppe C., Fial J., Kärger L., Carosella S., Zimmerling C., Albrecht F., Darskovic M., Engelfried M., Middendorf P., Henning F. |
Stuttgart |
*TAGUNG* |
|
|
Continuous CAE chain for composite design, established on an HPC system and accessible via web-based user-interfaces |
Kärger L., Galkin S., Zimmerling C., Dörr D., Schirmaier F.J., Oeckerath A., Wolf K., Linden J. |
Stockholm |
Modelling of the Non-Isothermal Crystallization Kinetics of Polyamide 6 Composites During Thermoforming |
Kugele D., Dörr D., Wittemann F., Hangs B., Rausch J., Kärger L., Henning F. |
Dublin |
Modeling and Validation of Gripper Induced Membrane Forces in Finite Element Forming Simulation of Continuously Reinforced Composites |
Poppe C., Dörr D., Joppich T., Kärger L., Henning F. |
Dublin |
On The Relevance of Modeling Viscoelastic Bending Behavior in Finite Element Forming Simulation of Continuously Fiber Reinforced Composites |
Dörr D., Schirmaier F. J., Henning F., Kärger L. |
Dublin |
A Benchmark Study of Finite Element Codes for Forming Simulation of Thermoplastic UD-Tapes |
Dörr D., Brymerski W., Ropers S., Leutz D., Joppich T., Kärger L., Henning F. |
|
Rheological in-mold measurements and characterizations of Sheet-Molding-Compound (SMC) formulations with different constitution properties by using a compressible shell model |
Hohberg, M.; Kärger, L.; Bücheler, D.; Henning, F. |
International Polymer Processing 32(5), pp. 1-10, 2017 |
Simulation of the Influence of Embedded Inserts on the RTM Filling Behavior Considering Local Fiber Structure |
Seuffert J., Kärger L., Henning F. |
Key Engineering Materials, Vol. 742, pp. 681-688, 2017 |
A macroscopic approach to simulate the forming behaviour of stitched unidirectional non-crimp fabrics |
Schirmaier F.J., Dörr D., Henning F., Kärger L. |
Composites Part A 102: 322-335, 2017 |
Evaluation of the physical mechanisms of adhesively bonded metal-based hybrid material systems under tensile loading |
Hummelberger, D.; Kärger, L.; Weidenmann, K. A.; Staeves, J.; Henning, F. |
Materials & Design |
Simplified phenomenological model of the nonlinear behavior of FRPs under combined stress states |
Galkin S., Schirmaier F., Kärger L. |
Journal of Composite Materials |
*TAGUNG* |
|
|
A viscoelastic approach for modeling bending behavior in Finite Element forming simulation of continuously fiber reinforced composites |
Dörr D., Schirmaier F.J., Henning F., Kärger L. |
Composites: Part A 94: 113-123 |
Continuous-discontinuous long fiber-reinforced polymer structures: Modeling, characterization and validation |
Böhlke T., Henning F., Kärger L., Seelig T., Weidenmann KA. |
Karlsruhe |
Integrated engineering of continuous-discontinuous long fiber reinforced polymer (CoDiCoFRP) structures in the framework of the International Research Training Group GRK 2078 |
Böhlke T., Kärger L.*, Weidenmann KA., Seelig T., Henning F. |
Hamburg |
Process Simulation of Sheet Molding Compound (SMC) as key for the integrated Simulation Chain |
Hohberg M., Kärger L., Hrymak A., Henning F. |
Hamburg |
Mechanism-based specific design improves the tensile behavior of hybrid material systems consisting of sheet metals with different stiffness levels |
Hummelberger D., Weidenmann KA., Kärger L., Henning F. |
Lissabon |
Stress analysis and design suggestions for multi-loop carbon roving rosettes to reinforce bolt-loaded open-hole laminates |
Kärger L., Botzkowski T., Galkin S., Wagner S., Sikora SP. |
München |
Funktionsintegrierter Leichtbau - Von der Simulation bis zum Bauteil: Hochleistungsfaserverbundstrukturen |
Henning F., Karcher M., Kärger L., Müller T. |
Reimund Neugebauer (Hrsg.) Fraunhofer-Forschungsfokus „Ressourceneffizienz“: 127-143 |
Virtual characterization and macroscopic material modeling of a carbon fiber-reinforced PA6 UD composite |
Rösner AM., Kärger L., Henning F. |
Journal of Composite Materials 51(21): 3075–3086 |
Accurate Cure Modeling for Isothermal Processing of Fast Curing Epoxy Resins |
Bernath, A.; Kärger, L.; Henning, F. |
Polymers 8 (11): 390 |
Design concept of a lightweight electric motor casing with support from thermo-mechanical simulate |
Müller, T., Blazek, G., Henning, F. |
|
Simulation methods for process design of structural composite components |
Kärger L., Bernath A., Dörr D., Galkin S., Magagnato D., Schirmaier F., Henning F. |
Weissach |
Forming simulation for process design of curved CFRP structures |
Kärger L., Dörr D., Galkin S., Schirmaier F., Henning F. |
Augsburg |
Testing, modelling and evaluation of different joint designs for CFRP sub-preforms regarding their loading capacity under three point bending |
Galkin S., Fürst T., Henning F., Kärger L. |
Porto |
Iterative determination of the tailoring of blanks for a waste-free composite forming by means of finite element forming simulation Proceedings |
Dörr D., Lipowsky L., Schirmaier F., Kärger L., Henning F. |
Lissabon |
*TAGUNG* |
|
|
Experimental analysis of the influence of foam density and surface treatment on the failure behavior of polyurethane foam during the RTM process |
Jens Gerstenkorn, Guenter Deinzer, Martin H. Kothmann, Felix Diebold, Luise Kärger, Frank Henning |
|
Application of a Multi Objective Optimization approach for Continuous Fiber Tapes in Hybrid Composite Structures |
Fengler, B.; Kärger, L.; Hrymak, A.; Henning, F. |
|
Prozesssimulation von Sheet Molding Compound (SMC) als Schlüssel zur integrierten Simulationskette |
Hohberg, M.; Kärger, L.; Hrymak, A.; Henning, F. |
|
Experimental and numerical analysis of bolt-loaded open-hole laminates reinforced by winded carbon rovings |
Botzkowski T., Galkin S., Wagner S., Sikora S., Kärger L. |
Composite Structures 114 |
RTM molding simulation for unidirectional fiber reinforced composites considering local fiber orientation and fiber volume fraction |
Magagnato, D.; Henning, F. |
Journal of Plastics Technology, Volume 12 (3) |
Experimental and Simulative Parameter Study on the Rib Filling Pattern of LFT in Combination with UD-Tapes in the Compression Molding Process |
Hohberg, Martin |
|
Mold filling simulations help improve the manufacturing process for CFRP components |
Magagnato, Dino |
|
Failure evaluation and design suggestions for multi-loop carbon roving rosettes to reinforce bolt-loaded open-hole laminates |
Kärger, Luise; Botzkowski, Tim; Galkin, Siegfried |
|
Characterization of the multi-axial material behavior of polymer foams during the RTM process |
Gerstenkorn, Jens; Kothmann, Martin H.; Diebold, Felix; Deinzer, Günter; Kärger, Luise; Henning, Frank |
|
On the Thermal Behavior of Thermoplastic Laminates During Transfer – a Novel Wind-Tunnel Approach |
Kugele, Daniel; Rausch, Julius; Henning, Frank |
|
Sensitivity of material properties on wrinkling behavior and fiber reorientation of thermoplastic UD-Tape laminates during forming analyzed by Finite Element forming simulation |
Dörr, Dominik; Joppich, Tobias; Schirmaier, Fabian; Mosthaf, Tobias; Kärger, Luise; Henning, Fank |
|
Entwicklung eines modularen Trägersystems für Photovoltaik-Solarzellen aus faserverstärktem Thermoplast |
Fengler, Benedikt; Anselment, Christian; Jauch, Raphael; Widlak, Eugène; Henning, Frank |
|
A Method for Validation of Finite Element Forming Simulation On Basis of a Pointwise Comparison of Distance and Curvature |
Dörr, Dominik; Joppich, Tobias; Schirmaier, Fabian; Mosthaf, Tobias; Kärger, Luise; Henning, Frank |
|
Integrierte Entwicklung kontinuierlich-diskontinuierlich langfaserverstärkter Polymerstrukturen im Rahmen des internationalen Graduiertenkollegs GRK 2078 |
Böhlke, Thomas; Kärger, Luise; Weidenmann, Kay-André, Henning, Frank |
|
Characterization of the draping behaviour of sewed unidirectional non-crimp fabrics (UD-NCF) |
Schirmaier, Fabian; Weidenmann, Kay-André; Kärger, Luise, Henning, Frank |
Composites Part A |
Application of an Evolutionary Algorithm to optimize Continuous Fiber Patches in Hybrid Fiber Composite Structures |
Fengler, Benedikt; Kärger, Luise; Hrymak, A.; Henning, Frank |
|
Application of a virtual shear stress model and comparison with WWFE-III prediction to describe the non-linear behavior of composite materials |
Galkin, Siegfried; Schirmaier, Fabian; Kärger, Luise
|
|
Simulationsmethoden im Faserverbundleichtbau |
Saburow, Oleg; Fengler, Benedikt; Henning, Frank
|
|
Evaluation of different hybrid material systems and systematic analysis of their physical mechanisms in terms of fatigue |
Hummelberger, David; Kärger, Luise; Henning, Frank
|
|
Bewertung unterschiedlicher hybrider Werkstoffsysteme und systematische Betrachtung ihrer physikalischen Wirkmechanismen hinsichtlich Risswachstum |
Hummelberger, David; Kärger, Luise; Henning, Frank
|
|
Simulation Methods in Lightweight Design |
Saburow, Oleg; Fengler, Benedikt; Henning, Frank
|
|
Process Simulation of Hybrid SMC Structures with Local Continuous Fiber Reinforcements |
Hohberg, Martin
|
|
Holistic Development of High-Pressure RTM Composite Structures |
Henning, Frank; Bernath, Alexander; Galkin, Siegfried; Kärger, Luise; Magagnato, Dino; Schirmaier, Fabian; Thoma, Bernd
|
|
Simulation of combined forming and injection molding processes |
Müller, Timo; Henning, Frank
|
|
Characterization and simulation of the time-dependent anisotropic deformation behaviour of continuously reinforced PA6 material |
Rösner, Andreas; Kärger, Luise; Henning, Frank
|
|
Phenomenological characterization and macromechnical modeling of anisotropic, non-linear behavior of sheet molding compounds (SMC) |
; Rayling, U.; Weidenmann, K. A.; ;
|
|
Strategien zur Design-Optimierung von langfaserverstärkten Bauteilen |
Fengler, Benedikt
|
|
Herausforderungen einer durchgängigen CAE-Kette am Beispiel des RTM-Prozesses |
Kärger, Luise
|
|
Optimierungsansatz zur Generierung von Designvorschlägen für Bauteile aus langfaserverstärkten Werkstoffen |
Fengler, Benedikt; Henning, Frank
|
|
Rheologische SMC-Messungen |
Hohberg, Martin.; Henning, Frank.; Klein, C.; Wilhelm
|
|
Development and validation of a CAE chain for unidirectional fibre reinforced composite components |
Kärger, Luise; Bernath, Alexander; Fritz, F.; Galkin, Siegfried; Magagnato, Dino; Oeckerath, A.; Schön, A.; Henning, Frank
|
|
Process-oriented determination of preform permeability and matrix viscosity during mold filling in resin transfer molding |
Magagnato, Dino; Henning, Frank
|
|
Experimental characterization to determine the influence of different binder systems to the preform permeability during RTM manufacturing |
Magagnato, Dino; Thoma, Bernd; Henning, Frank
|
|
Comparison of Finite Volume and Finite Element Methods for the Prediction of Process |
Bernath, Alexander; Henning, Frank
|
|
Virtuelle Prozesskette für Bauteile aus Hochleistungsfaserverbunden |
Kärger, Luise; Fritz, F.; Magagnato, Dino; Galkin, Siegfried; Schön, A.; Oeckerath, A.; Wolf, K.; Henning, Frank
|
|
Entwicklungsstand und Anwendungsbeispiele einer virtuellen Prozesskette für RTM-Bauteile |
Kärger, Luise; Fritz, F.; Magagnato, Dino; Galkin, Siegfried; Schön, A.; Oeckerath, A.; Wolf, K.; Henning, Frank
|
|
Fracture mechanics evaluation of RTM-CFRP materials for large-scale production of automotive structures |
Gall, M; Hohe, J; Kärger, Luise; Galkin; Siegfried
|
|
Influence of chemical-stitching binder technology on preform permeability |
Magagnato, Dino; Thoma, Bernd; Henning, Frank
|
|
Parametrisierung und Evaluierung von Schädigungsmodellen für Faserverbundkunststoffe auf Basis umfangreicher Charakterisierungs- und Validierungsversuche |
Galkin, Siegfried; Kärger, Luise; Häfele, P.; Gall, M.; Voß, H.; Henning, Frank |
|
A new efficient and reliable algorithm to determine the fracture angle for Puck's 3D matrix failure criterion for UD composites |
Schirmaier, F.; Weiland, J.; Kärger, L.; Henning, F. |
Composites Science and Technology |
An integrated development approach to combine design, manufacturing and validation of high-pressure RTM composite structures |
Henning, Frank; Bernath, Alexander; ; ; ; |
|
Änderung der mechanischen Eigenschaften langfaserverstärkter Thermoplaste beim Fließpressen mit großen Fließwegen |
Müller, Timo; Hangs, B.; Henning, Frank |
|
Geschlossene Simulation und experimenteller Vergleich der effektiven Bauteilsteifigkeit unter Berücksichtigung der lokalen Materialeigenschaften einer im Fließpressprozess hergestellten SMC-Sickenstruktur |
Sanwald, S.; Henning, Frank; Bertram, B.; Weidenmann, K. A.; Brylka, B.; Müller, V.; Böhlke, T. |
|
Simulation of the form filling process during the RTM-manufacturing to optimize the cycle times for the production of carbon fibre compounds |
Magagnato, Dino; Henning, Frank |
|
Experimentelle und Numerische Untersuchung der Infiltration der RTM- Fertigung |
Magagnato, Dino; Frey, M.; Bernath, Alexander; Steibler, P.; Henning, Frank |
|
Aufbau einer durchgängigen CAE-Kette durch Verknüpfung von Drapier-, Formfüll- und Struktursimulation zur ganzheitlichen Bewertung von Bauteilen aus Hochleistungsfaserverbunden |
Kärger, Luise; Schön, A.; Fritz, F.; Böhler, P.; Magagnato, Dino; Fischer, S.; Henning, Frank |
|
Charakterisierung des Deformationsverhaltens eines durch Köpergewebe verstärkten Thermoplasten |
Rösner, Andreas; Kärger, Luise; Henning, Frank; Weidenmann, K. A. |
|
Two new approaches to reduce the numerical effort of Puck’s action plane strength criterion for 3D stress states in CFRP structures |
Schirmaier, Fabian; Weiland, J.; Kärger, Luise; Henning, Frank |
|
Virtual Process Chain for an integrated assessment of high-performance composite structures |
Kärger, Luise; Schön, A.; Fritz, F.; Böhler, P.; Magagnato, Dino; Fischer, S.; Henning, Frank |
|
Modelling of the deformation behaviour of a twill weave reinforced thermoplast using the angle bisector framework |
Rösner, Andreas
|
|