Home | Impressum | Datenschutz | Sitemap | Fakultät Maschinenbau | KIT

2019


Damping Characterization of Hybrid Carbon Fiber Elastomer Metal Laminates using Experimental and Numerical Dynamic Mechanical Analysis.
Sessner, V.; Jackstadt, A.; Liebig, W.; Kärger, L.; Weidenmann, K.
2019. Journal of composites science, 3 (1), 3. doi:10.3390/jcs3010003
Fast processing and continuous simulation of automotive structural composite components.
Henning, F.; Kärger, L.; Dörr, D.; Schirmaier, F. J.; Seuffert, J.; Bernath, A.
2019. Composites science and technology, 171, 261–279. doi:10.1016/j.compscitech.2018.12.007
Enhanced Transient Hot Bridge Method Using a Finite Element Analysis.
Gaiser, J.; Stripf, M.; Henning, F.
2019. International journal of thermophysics, 40 (1), Art. Nr.: 12. doi:10.1007/s10765-018-2476-y

Publikationsliste


Damping Characterization of Hybrid Carbon Fiber Elastomer Metal Laminates using Experimental and Numerical Dynamic Mechanical Analysis.
Sessner, V.; Jackstadt, A.; Liebig, W.; Kärger, L.; Weidenmann, K.
2019. Journal of composites science, 3 (1), 3. doi:10.3390/jcs3010003
Fast processing and continuous simulation of automotive structural composite components.
Henning, F.; Kärger, L.; Dörr, D.; Schirmaier, F. J.; Seuffert, J.; Bernath, A.
2019. Composites science and technology, 171, 261–279. doi:10.1016/j.compscitech.2018.12.007
Enhanced Transient Hot Bridge Method Using a Finite Element Analysis.
Gaiser, J.; Stripf, M.; Henning, F.
2019. International journal of thermophysics, 40 (1), Art. Nr.: 12. doi:10.1007/s10765-018-2476-y
Smart dispersion: Validation of OCT and impedance spectroscopy as solutions for in-situ dispersion analysis of CNP/EP-composites.
Meeuw, H.; Körbelin, J.; Bernstorff, D. von; Augustin, T.; Liebig, W. V.; Fiedler, B.
2018. Materialia, 1, 185–197. doi:10.1016/j.mtla.2018.06.002
Numerical and experimental investigations of the damping behaviour of hybrid CFRP-elastomer-metal laminates.
Liebig, W. V.; Sessner, V.; Weidenmann, K. A.; Kärger, L.
2018. Composite Structures, 202, 1109–1113. doi:10.1016/j.compstruct.2018.05.051
Nozzle clogging factors during fused filament fabrication of spherical particle filled polymers.
Beran, T.; Mulholland, T.; Henning, F.; Rudolph, N.; Osswald, T. A.
2018. Additive manufacturing, 23, 206–214. doi:10.1016/j.addma.2018.08.009
Comparison of analytical approaches predicting the compressive strength of fibre reinforced polymers.
Leopold, C.; Harder, S.; Philipkowski, T.; Liebig, W. V.; Fiedler, B.
2018. Materials, 10 (12), Art. Nr.: 2517. doi:10.3390/ma11122517
Experimental and numerical investigation of the shear behaviour of infiltrated woven fabrics.
Poppe, C.; Dörr, D.; Henning, F.; Kärger, L.
2018. Composites / A, 114, 327–337. doi:10.1016/j.compositesa.2018.08.018
Optimisation of manufacturing process parameters using deep neural networks as surrogate models.
Pfrommer, J.; Zimmerling, C.; Liu, J.; Kärger, L.; Henning, F.; Beyerer, J.
2018. 51st CIRP Conference on Manufacturing Systems, CIRP CMS 2018; Stockholm Waterfront Congress CentreStockholm; Sweden; 16 May 2018 through 18 May 2018. Ed.: T. Kjellberg, 426–431, Elsevier, Amsterdam. doi:10.1016/j.procir.2018.03.046
A 2D modeling approach for fluid propagation during FE-forming simulation of continuously reinforced composites in wet compression moulding.
Poppe, C.; Dörr, D.; Henning, F.; Kärger, L.
2018. Proceedings of the 21st International ESAFORM Conference on Material Forming : ESAFORM 2018 : Palermo, Italy, 23-25 April 2018. Ed.: L. Fratini, Art.Nr. 020022, AIP Publishing, Melville (NY). doi:10.1063/1.5034823
Modelling approach for anisotropic inter-ply slippage in finite element forming simulation of thermoplastic UD-tapes.
Dörr, D.; Faisst, M.; Joppich, T.; Poppe, C.; Henning, F.; Kärger, L.
2018. Proceedings of the 21st International ESAFORM Conference on Material Forming : ESAFORM 2018 : Palermo, Italy, 23-25 April 2018. Ed.: L. Fratini, Art.Nr. 020005, AIP Publishin, Meville (NY). doi:10.1063/1.5034806
A meta-model based approach for rapid formability estimation of continuous fibre reinforced components.
Zimmerling, C.; Dörr, D.; Henning, F.; Kärger, L.
2018. Proceedings of the 21st International ESAFORM Conference on Material Forming : ESAFORM 2018 : Palermo, Italy, 23-25 April 2018. Ed.: L. Fratini, Art.Nr. 020042, AIP Publishing, Melville (NY). doi:10.1063/1.5034843
Forming optimisation embedded in a CAE chain to assess and enhance the structural performance of composite components.
Kärger, L.; Galkin, S.; Zimmerling, C.; Dörr, D.; Linden, J.; Oeckerath, A.; Wolf, K.
2018. Composite structures, 192, 143–152. doi:10.1016/j.compstruct.2018.02.041
Simplified phenomenological model of the nonlinear behavior of FRPs under combined stress states.
Galkin, S.; Schirmaier, F. J.; Kärger, L.
2018. Journal of composite materials, 52 (4), 475–485. doi:10.1177/0021998317709332
A three-dimensional damage model for transversely isotropic composites in the framework of finite strain.
Naake, D.; Welschinger, F.; Kärger, L.; Henning, F.
2017. 21st International Conference on Composite Materials, ICCM 2017; Xi’an; China; 20 August 2017 through 25 August 2017, ICCM, Beijing
Influence of carbon nanoparticle geometry in epoxy matrix on mechanical properties and failure initiation regarding the size effect.
Leopold, C.; Augustin, T.; Schwebler, T.; Liebig, W. V.; Wittich, H.; Fiedler, B.
2017. 21st International Conference on Composite Materials, ICCM 2017; Xi’an; China; 20 August 2017 through 25 August 2017, ICCM, Beijing
Modeling of the Non-Isothermal Crystallization Kinetics of Polyamide 6 Composites During Thermoforming.
Kugele, D.; Dörr, D.; Wittemann, F.; Hangs, B.; Rausch, J.; Kärger, L.; Henning, F.
2017. Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017, Ireland, Dublin, 26th - 28th April 2017, Art.Nr. 030005, American Institute of Physics, Melville (NY). doi:10.1063/1.5007992
Modeling and validation of gripper induced membrane forces in finite element forming simulation of continuously reinforced composites.
Poppe, C.; Dörr, D.; Kärger, L.; Henning, F.; Joppich, T.; Henning, F.
2017. Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017, Ireland, Dublin, 26–28 April 2017, Art.Nr. 030002, American Institute of Physics, Melville (NY). doi:10.1063/1.5007989
On the relevance of modeling viscoelastic bending behavior in finite element forming simulation of continuously fiber reinforced thermoplastics.
Dörr, D.; Schirmaier, F. J.; Henning, F.; Kärger, L.
2017. Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017, Ireland, Dublin, 26th - 28th April 2017, Art.Nr. 030003, American Institute of Physics, Melville (NY). doi:10.1063/1.5007990
Compression fracture of CFRP laminates containing stress intensifications.
Leopold, C.; Schütt, M.; Liebig, W. V.; Philipkowski, T.; Kürten, J.; Schulte, K.; Fiedler, B.
2017. Materials, 10 (9), Art.Nr.: 1039. doi:10.3390/ma10091039
Virtual characterization and macroscopic material modeling of a carbon fiber-reinforced PA6 UD composite.
Rösner, A. M.; Kärger, L.; Henning, F.
2017. Journal of composite materials, 51 (21), 3075–3086. doi:10.1177/0021998316681186
Simulation of the influence of embedded inserts on the rtm filling behavior considering local fiber structure.
Seuffert, J.; Kärger, L.; Henning, F.
2017. 21st Symposium on Composites, 2017; Bremen; Germany; 5 July 2017 through 7 July 2017. Ed.: A. S. Herrmann, 681–688, Trans Tech Publications Ltd, Zürich. doi:10.4028/www.scientific.net/KEM.742.681
A Benchmark Study of Finite Element Codes for Forming Simulation of Thermoplastic UD-Tapes.
Dörr, D.; Brymerski, W.; Ropers, S.; Leutz, D.; Joppich, T.; Kärger, L.; Henning, F.
2017. Procedia CIRP, 66, 101–106. doi:10.1016/j.procir.2017.03.223
Influence of carbon nanoparticle modification on the mechanical and electrical properties of epoxy in small volumes.
Leopold, C.; Augustin, T.; Schwebler, T.; Lehmann, J.; Liebig, W. V.; Fiedler, B.
2017. Journal of colloid and interface science, 506, 620–632. doi:10.1016/j.jcis.2017.07.085
Evaluation of the physical mechanisms of adhesively bonded metal-based hybrid material systems under tensile loading.
Hummelberger, D.; Kärger, L.; Weidenmann, K. A.; Staeves, J.; Henning, F.
2017. Materials and design, 132, 215–224. doi:10.1016/j.matdes.2017.07.001
Sensitivity of material properties on wrinkling behavior and fiber reorientation of thermoplastic UD-Tape laminates during forming analyzed by Finite Element forming simulation.
Dörr, D.; Joppich, T.; Schirmaier, F.; Mosthaf, T.; Kärger, L.; Henning, F.
2016. 17th European Conference on Composite Materials, ECCM 2016, Munich, Germany; 26. - 30. June, 2016
Stress analysis and design suggestions for multi-loop carbon roving rosettes to reinforce bolt-loaded open-hole laminates.
Kärger, L.; Botzkowski, T.; Galkin, S.; Wagner, S.; Sikora, S. P.
2016. ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials; Munich; Germany; 26 June 2016 through 30 June 2016, European Society for Composite Materials (ESCM), Aachen
On the thermal behavior of thermoplastic laminates during transfer - A novel wind-tunnel approach.
Kugele, D.; Rausch, J.; Kriegseis, J.; Gündisch, K.; Kärger, L.; Henning, F.
2016. ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials; Munich; Germany; 26 June 2016 through 30 June 2016, European Society for Composite Materials (ESCM), Aachen
Hybrid resin improves position and alignment of continuously reinforced prepreg during compression co-molding with sheet molding compound.
Bücheler, D.; Henning, F.
2016. ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials; Munich; Germany; 26 June 2016 through 30 June 2016, European Society for Composite Materials (ESCM), Aachen
Characterization of the multi-axial material behavior of polymer foams during the RTM process.
Gerstenkorn, J.; Kothmann, M. H.; Diebold, F.; Deinzer, G.; Kärger, L.; Henning, F.
2016. ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials; Munich; Germany; 26 June 2016 through 30 June 2016, CD-ROM, MAI Carbon Cluster Management, Augsburg
Mechanical properties of unidirectional continuous carbon fiber reinforced sheet molding compounds.
Grigor’ev, P.; Bücheler, D.; Henning, F.; Weidenmann, K. A.
2016. 17th European Conference on Composite Materials, ECCM 2016; Munich; Germany; 26 June 2016 through 30 June 2016, European Society for Composite Materials (ESCM), Aachen
Hexaphenoxycyclotriphosphazene as FR for CFR anionic PA6 via T-RTM : A study of mechanical and thermal properties.
Höhne, C.-C.; Wendel, R.; Käbisch, B.; Anders, T.; Henning, F.; Kroke, E.
2016. Fire and materials, 41 (4), 291–306. doi:10.1002/fam.2375
Experimental and numerical analysis of bolt-loaded open-hole laminates reinforced by winded carbon rovings.
Botzkowski, T.; Galkin, S.; Wagner, S.; Sikora, S. P.; Kärger, L.
2016. Composite structures, 141, 194–202. doi:10.1016/j.compstruct.2016.01.057
Layup and process dependent wrinkling behavior of PPS/CF UD tape-laminates during non-isothermal press forming into a complex component.
Joppich, T.; Doerr, D.; Meulen, L. van der; Link, T.; Hangs, B.; Henning, F.
2016. 19th International ESAFORM Conference on Material Forming, Nantes; France; 27- 29 April 2016. Ed.: F. Chinesta, 170012, AIP, Melville (NY). doi:10.1063/1.4963568
A method for validation of finite element forming simulation on basis of a pointwise comparison of distance and curvature.
Dörr, D.; Joppich, T.; Schirmaier, F.; Mosthaf, T.; Kärger, L.; Henning, F.
2016. 19th International ESAFORM Conference on Material Forming (ESAFORM) Nantes; France; 27- 29 April 2016. Ed.: F. Chinesta, 170011, AIP, Melville (NY). doi:10.1063/1.4963567
Accurate Cure Modeling for Isothermal Processing of Fast Curing Epoxy Resins.
Bernath, A.; Kärger, L.; Henning, F.
2016. Polymers, 8 (11), 390. doi:10.3390/polym8110390
Development of a novel consolidation process for continuous-fiber-reinforced thermoplastics.
Baumgärtner, S.; Lohr, C.; Henning, F.
2016. 17th European Conference on Composite Materials (ECCM17), Munich, Germany, 26.-30. Juni 2016, European Society for Composite Materials (ESCM), Aachen
Development and validation of a CAE chain for unidirectional fibre reinforced composite components.
Kärger, L.; Bernath, A.; Fritz, F.; Galkin, S.; Magagnato, D.; Oeckerath, A.; Schön, A.; Henning, F.
2015. Composite structures, 132, 350–358. doi:10.1016/j.compstruct.2015.05.047
Experimental characterization to determine the influence of different binder systems to the preform permeability during RTM manufacturing.
Magagnato, D.; Thoma, B.; Henning, F.
2015. Zeitschrift Kunststofftechnik / Journal of Plastics Technology, 11 (4), 256–270. doi:10.3139/O999.03042015
An integrated development approach to combine design, manufacturing and validation of high-pressure RTM composite structures.
Henning, F.; Bernath, A.; Chaudhari, R.; Kärger, L.; Magagnato, D.; Schirmaier, F.
2014. SAMPE Annual Tech Conference; 2.-5.06.2014, Seattle
Parametrisierung und Evaluierung von Schädigungsmodellen für Faserverbundkunststoffe auf Basis umfangreicher Charakterisierungs- und Validierungsversuche.
Galkin, S.; Kärger, L.; Häfele, P.; Gall, M.; Voß, H.; Henning, F.
2014. International Association for the Engineering Analysis Community -NAFEMS-: Berechnung und Simulation - Anwendungen, Entwicklungen, Trends : NAFEMS deutschsprachige Konferenz 2014; 20-21 Mai 2014, Bamberg Bernau am Chiemsee: NAFEMS Deutschland, 2014, 133–137
A new efficient and reliable algorithm to determine the fracture angle for Puck’s 3D matrix failure criterion for UD composites.
Schirmaier, F.; Weiland, J.; Kärger, L.; Henning, F.
2014. Composites Science and Technology, 100, 19–25. doi:10.1016/j.compscitech.2014.05.033
Virtual Process Chain for an integrated assessment of high-performance composite structures.
Kärger, L.; Schön, A.; Fritz, F.; Böhler, P.; Magagnato, D.; Fischer, S.; Henning, F.
2013. NAFEMS World Congress, Salzburg, Österreich, 9.-12. Juni 2013
Aufbau einer durchgängigen CAE-Kette durch Verknüpfung von Drapier-, Formfüll- und Struktursimulation zur ganzheitlichen Bewertung von Bauteilen aus Hochleistungsfaserverbunden.
Kärger, L.; Schön, A.; Fritz, F.; Böhler, P.; Magagnato, D.; Fischer, S.; Henning, F.
2013. 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, Karlsruhe, 3.-5. Juli 2013
Simulation of the form filling process during the RTM-manufacturing to optimize the cycle times for the production of carbon fibre compounds.
Magagnato, D.; Henning, F.
2013. NAFEMS Seminar ’Innovative Anwendungen der Strömungssimulation (CFD) in der Produktentwicklung’, Wiesbaden, 18.-19. März 2013
Experimentelle und Numerische Untersuchung der Infiltration der RTM-Fertigung.
Magagnato, D.; Frey, M.; Bernath, A.; Steibler, P.; Henning, F.
2013. 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, Karlsruhe, 3.-5. Juli 2013