Publications

Evaluation of mechanical properties characterization of additively manufactured components
Frölich, F.; Bechtloff, L.; Scheuring, B. M.; Heuer, A. L.; Wittemann, F.; Kärger, L.; Liebig, W. V.
2025. Progress in Additive Manufacturing, 10 (2), 1217–1229. doi:10.1007/s40964-024-00700-2

A submodeling approach for efficient prediction of local temperature profiles in component-scale additive manufacturing
Frölich, F.; Hof, L.; Zimmerling, C.; Wittemann, F.; Kärger, L.
2024. The International Journal of Advanced Manufacturing Technology. doi:10.1007/s00170-024-14913-w

pyGCodeDecode: A Python package for time-accurate GCode simulation in material extrusion processes
Knirsch, J.; Frölich, F.; Hof, L.; Wittemann, F.; Kärger, L.
2024. Journal of Open Source Software, 9 (99), Art.-Nr.: 6465. doi:10.21105/joss.06465

Investigation of the thermoviscoelastic behavior of a closed-cell polymer structural foam under pressure for processing in hybrid LCM processes
Dietrich, S.; Dohmen, C.; Frölich, F.; Jackstadt, A.; Wittemann, F.; Kärger, L.
2024. Proceedings of the 21st European Conference on Composite Materials. Vol 2 Material Science. Ed.: C. Binetruy, 548–554, European Society for Composite Materials (ESCM)

Modeling time-dependent anisotropy in MEX component-scale process simulation
Di Nardo, M. E.; Frölich, F.; Kärger, L.; Carlone, P.
2024. Material Forming: ESAFORM 2024, 603–612, Materials Research Forum LLC. doi:10.21741/9781644903131-67

Electromechanical optimization of high reluctance torque variable flux machines under structural mechanical constraints
Kesten, J.; Armbruster, D.; Frölich, F.; Kärger, L.; Bonten, C.; Doppelbauer, M.
2024. Elektromechanische Antriebssysteme 2023 - Electromechanical Drive Systems 2023 Tagungsband der 9. Fachtagung (VDE OVE) 8. und 9. November 2023 in Wien, Ed.: Energietechnische Gesellschaft im VDE (ETG), 189–194, VDE Verlag

Homogenization of the Anisotropic Thermal Conductivity of Mesostructures in Material Extrusion
Hof, L.; Frölich, F.; Wittemann, F.; Kärger, L.
2024, July 2. 21st European Conference on Composite Materials (ECCM 2024), Nantes, France, July 2–5, 2024

Design concept of a repairable YASA axial flux machine with a hybrid cooling system
Schäfer, A.; Baranowski, M.; Springmann, M.; Hof, L.; Frölich, F.; Peter, A.; Parspour, N.; Fleischer, J.; Middendorf, P.; Kärger, L.; Michalowski, A.
2023. 12th International Conference on Power Electronics, Machines and Drives (PEMD 2023), 119–128, Institution of Engineering and Technology (IET). doi:10.1049/icp.2023.1987

Development of a test-method for characterization of the orientation dependent material properties of FFF structures
Frölich, F.; Bechtloff, L.; Scheuring, B. M.; Heuer, A.; Kärger, L.; Liebig, W. V.
2023, August 3. 23rd International Conference on Composite Materials (ICCM 2023), Belfast, United Kingdom, July 30–August 4, 2023

Entwicklung eines Simulationsmodells zur Strangablage in der Materialextrusion mit der Smoothed Particle Hydrodynamics Methode. master’s thesis
Hof, L.
2022, November 2. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000172570

Thermal Modeling of Laser Powder Bed Fusion during Printing on Temperature-Unstable Materials Considering Local Sintering
Frölich, F.; Kärger, L.
2022. Key Engineering Materials, 926, 331–340. doi:10.4028/p-uq57va

Hybrid material additive manufacturing: interlocking interfaces for fused filament fabrication on laser powder bed fusion substrates
Englert, L.; Heuer, A.; Engelskirchen, M. K.; Frölich, F.; Dietrich, S.; Liebig, W. V.; Kärger, L.; Schulze, V.
2022. Virtual and Physical Prototyping, 17 (3), 508–527. doi:10.1080/17452759.2022.2048228

Design Approach for a Novel Multi Material Variable Flux Synchronous Reluctance Machine without Rare Earth Magnets
Kesten, J.; Frölich, F.; Wittemann, F.; Knirsch, J.; Bechler, F.; Kärger, L.; Eberhard, P.; Henning, F.; Doppelbauer, M.
2022. 2022 International Conference on Electrical Machines (ICEM), Valencia, Spain, 05-08 September 2022, 2304–2310, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICEM51905.2022.9910780

Challenges in characterization of polylactic acid (PLA) for thermomechanical material modeling in material extrusion
Frölich, F.; Dörr, D.; Jackstadt, A.; Kärger, L.
2022, July 4. 11th European Solid Mechanics Conference (2022), Galway, Ireland, July 4–8, 2022

Investigation into the influence of the Mullins effect on the dynamic behavior of hybrid laminates
Jackstadt, A.; Frölich, F.; Liebig, W. V.; Kärger, L.; Weidenmann, K. A.
2022, July 7. 11th European Solid Mechanics Conference (2022), Galway, Ireland, July 4–8, 2022

Modeling the Mullins effect of rubbers used in constrained‐layer damping applications
Jackstadt, A.; Frölich, F.; Weidenmann, K.; Kärger, L.
2021. Proceedings in applied mathematics and mechanics, 21 (1), e202100098. doi:10.1002/pamm.202100098

Modeling and parameter identification for predicting the Mullins Effect of rubbers used in constrained-layer damping applications
Jackstadt, A.; Frölich, F.; Liebig, W. V.; Weidenmann, K. A.; Kärger, L.
2021, March 16. 91st Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2021), Kassel, Germany, March 15–19, 2021